Grandstream

This page explains the configuration of Grandstream access points for external Captive Portal and RADIUS authentication.

IronWifi Console Configuration

  1. Log into the IronWifi console or register for free
  2. Create a new network
  3. After that, create a new captive portal, with vendor Grandstream

Access Point Configuration

Log in to your Grandstream Cloud account at https://www.gwn.cloud

Step 1 - Captive Portal Policy

Click Captive Portal > Policy List on the left menu. Click Add then configure with the below settings:

  • Name - test-portal
  • Splash Page - External
  • Platform - Universal Platform
  • External Splash Server Address - 
  • RADIUS Server Address - 
  • RADIUS Server Port - 
  • RADIUS Server Secret - 
  • Secondary RADIUS Server - disabled
  • Radius Accounting Server Address - 
  • Radius Accounting Server Port - 
  • Radius Accounting Server Secret - 
  • Accounting Update Interval (sec) - empty
  • Enable HTTPS Redirection - disabled
  • Enable Secure Portal - enabled
  • Pre Authentication Rule(s) - Hostname -

Click Save to continue.

Step 2 - SSID

Next, click SSIDs > Add and configure with the below settings:

  • SSID - testing-ssid
  • Enabled - enabled
  • Client IP Assignment - Bridge
  • VLAN - disabled
  • SSID Band - Dual-Band
  • Security Mode - Open
  • Enable Captive Portal - enabled
  • Captive Portal Policy - test-portal
  • MAC Filter - Disabled

Click Save to continue.

The configuration is now complete.