1. Help Center
  2. Access Point Instructions

Ruckus SmartZone

Access Point Instructions for Ruckus SmartZone

!Note!: Please make sure you are running SmartZone v3.0 or above in order for this to work

IronWifi Console Configuration

  1. Log into the IronWifi console or register for free
  2. Create a new network
  3. After that, create a new captive portal, with vendor Ruckus NBI

Access Point Configuration

Log into your SmartZone web interface.

  1. Click Services & Profiles > Authentication on the left. Click the Proxy (SZ Authenticator) tab then Create and configure with:
  • Name - Guest WiFi
  • Service Protocol - RADIUS
  • Primary Server IP Address - get this value from the IronWifi console
  • Port - get this value from the IronWifi console
  • Shared Secret - get this value from the IronWifi console
  • Confirm Secret - get this value from the IronWifi console
  • Backup RADIUS - Enable Secondary Server
  • Secondary Server IP Address - get this value from the IronWifi console
  • Port - get this value from the IronWifi console
  • Shared Secret - get this value from the IronWifi console
  • Confirm Secret - get this value from the IronWifi console

Click OK to save.

  1. Next, click Accounting on the left. Click the Proxy tab then Create and configure with:
  • Name - Guest WiFi Acct
  • Primary Server IP Address - get this value from the IronWifi console
  • Port - get this value from the IronWifi console
  • Shared Secret - get this value from the IronWifi console
  • Confirm Secret - get this value from the IronWifi console
  • Backup RADIUS - Enable Secondary Server
  • Secondary Server IP Address - get this value from the IronWifi console
  • Port - get this value from the IronWifi console
  • Shared Secret - get this value from the IronWifi console
  • Confirm Secret - get this value from the IronWifi console

Click OK to save.

Hotspot

  1. Click Hotspots & Portals on the left. Click the Hotspot (WISPr) tab then Create and configure with:
  • Portal Name - Guest Wi-Fi
  • Smart Client Support - None
  • Login URL - External
  • Redirect unauthenticated users to (Primary) - get this value from the IronWifi console
  • Redirected MAC Format - AA-BB-CC-DD-EE-FF
  • HTTPS Redirect - ON
  • Start Page - Redirect to the following URL - get this value from the IronWifi console
  • Walled Garden List - 107.178.250.42

You will also need to include the following domains in the walled garden list if you want to make use of social login.

Facebook: Twitter Linkedin Instagram
*.facebook.com *.twitter.com *.linkedin.com *.instagram.com
*.fbcdn.net *.twimg.com *.licdn.net  
*.akamaihd.net   *.licdn.com  
connect.facebook.net   *.licdn.com  

Click OK to save.

Wireless LAN

  1. Click Wireless LANs on the left, then click Create. Configure with:

Under General Options:

  • Name - Guest Wi-Fi
  • SSID - Guest Wi-Fi (or whatever you wish)
  • Zone - Select a zone
  • WLAN Group - Select a group (or default)

Under Authentication Options:

  • Authentication Type - Hotspot (WISPr)
  • Method - Open

Under Encryption Options:

  • Method - None

Under Hotspot Portal:

  • Hotspot (WISPr) Portal - Guest Wi-Fi
  • Bypass CNA - Off
  • Authentication Service - ON - Use Controller as proxy - Guest WiFi
  • Accounting Service - ON - Use Controller as Proxy - Guest WiFi Acct
  • Send interim update - every 2 Minutes

Under RADIUS Options:

  • NAS ID - AP MAC
  • Delimiter - Dash
  • Single Session ID Accounting - ON
  • Called Station ID - AP MAC

Click OK to save.

Northbound API

  1. Click System > General Settings on the left and then the WISPr Northbound Interface tab. Cconfigure as follows:
  • Enable Northbound Portal Interface Support - ON
  • User Name - api
  • Password - enter any password you choose

Click OK to save.

To complete the set up you will need to log in to the IronWifi console, and under Networks > Captive Portals > Your Captive Portal you will need to enter your SmartZone Public IP and the Northbound Password you chose above. This allows our system to talk to the SmartZone for authenticating users and is a mandatory step.

Please create a new port forward with the following:

  • Local/Internal IP - Your Smartzone internal LAN IP (e.g. 192.168.0.1)
  • Protocol - TCP
  • Destination Port - 9080

The configuration is now complete.

! You must also install a valid SSL certificate on your controller/AP, in order to avoid authentication issues !